The problem is likely that your duckbill check valve has ‘sticky lips’ causing the valve to be stuck shut. This causes a vacuum to form in the electrolyzer (when it is shut off and cools down) which sucks water up (called backfilling) from the humidifier...
The ‘problem’ is that the check valve lips are partially stuck open. This is usually caused by lye crystals (which can also cause the lips to stick shut, which causes backfilling).A quick fix is to put the syringe on the valve (just like filling with water) and pull...
Here’s my FAQ Notes on how to easily fix. Here is a video to help you to Adjust AquaCure Liquid Level Sensorshttps://youtu.be/jka6VzQb1FwYou’ll need two screwdrivers. Sorry for the instructions length, but I tried to be comprehensive. The fix is simply to turn a...
If the AquaCure has a high liquid level alarm and it’s over-full, the alarm will be shrieking and the gas production will shut off.Sometimes the AquaCure Tower Cap will ‘retain’ fluid when you are filling it; due to a vapor lock preventing the...
From a Health Practitioner: “Fascinated by your research and discoveries in regard to health as I am a health practitioner that uses many alternative methods such as PEMF, EWOT, Lasers, electric stim, vibration, etc. I know you can’t...
Just mixing pure hydrogen (H2) and oxygen (O2) in a ratio of 67%:33% does not make the gas ‘Brown’s Gas’. Just as if mixing hydrogen and oxygen from bottles in a 67:33 ratio does not make Brown’s Gas. Brown’s Gas has 6 different constituents / combinations of...
